Power Over Ethernet

Arcdyn carries high quality gigabit POE switches that are guaranteed to reliably supply power and efficiently transmit data. Be confident that you are getting the POE switch that you need.

7 Items

per page
Set Descending Direction
View as List Grid
  • PoE Extender over Coax (pair)
    Add to Compare
    PoE Extender over Coax (pair)
    To extend IP/POE camera over coax cable. Connects IP/POE camera to 10/100BaseT POE Injector/Switch over one coax cable. Support POE: IEEE 802.3af and IEEE802.3at. Support 10/100 Mbps transmission rate. Power source from POE Injector/ POE Switch (sold separately).
    Add to Compare
  • PoE+ Injector
    Add to Compare
    PoE+ Injector

    SKU: ArcdynInjector

    The Arcdyn PoE injector is a valid choice when you have a camera in a remote location, a large network, or just a standalone camera. The Arcdyn injector provides power to the camera by "injecting" it into the ethernet line. This device allows you to power a camera without the use of one of our Arcdyn PoE switches.
    Add to Compare
  • PoE+ Extender
    Add to Compare
    PoE+ Extender

    SKU: ArcdynExtender

    The Arcdyn PoE Extender is a great device for those extra long camera runs. It requires no additional power supply and is capable of extending your cameras range by 300 Feet. You can use up to 2 Extenders on any camera run allowing you to reach just under 1000 feet from the original source.
    Add to Compare
  • 24 Port PoE Switch (2 + 2 Uplink)
    Add to Compare
    24 Port PoE Switch (2 + 2 Uplink)

    SKU: ArcdynPoE-24

    This 24-Port Gigabit POE can power up to 24 IP cameras and has four uplink ports which allow you to connect the switch to your local network. It has a max Power over Ethernet budget of 250 Watts allowing you to connect various models of cameras. This switch also features two Fiber uplink ports as well as two copper uplink ports. This 24 Port POE Switch is also capable of POE Extension. With POE Extend Mode on, 8 of the 24 ports can extend POE and data up to 750ft via Cat. 5e twisted pair or above. @ 10Mbps.
    Add to Compare
  • 16 Port PoE Switch (2 + 2 Uplink)
    Add to Compare
    16 Port PoE Switch (2 + 2 Uplink)

    SKU: ArcdynPoE-16

    This 16-Port Gigabit POE can power up to 16 IP cameras and has four uplink ports which allow you to connect the switch to your local network. It has a max Power over Ethernet budget of 250 Watts allowing you to have several different camera variations configured. This switch also features two Fiber uplink ports as well as two GB copper uplink ports. 8 Port with POE Extend Feature. With the POE Extend Mode on, it can extend power and video signal up to 750ft via Cat. 5e twisted pair or above. @ 10Mbps.
    Add to Compare
  • 8 Port PoE Switch (+1 GB Uplink)
    Add to Compare
    8 Port PoE Switch (+1 GB Uplink)

    SKU: ArcdynPoE-8

    This 8-Port Gigabit POE can power up to 8 IP cameras and has two uplink ports which allow you to connect the cameras to a network. It has a max Power over Ethernet budget of 130 Watts allowing you to have many different camera configurations. 2 Port with POE Extend Feature. With the POE Extend Mode on, it can extend power and video signal up to 750ft via Cat. 5e twisted pair or above. @ 10Mbps.
    Add to Compare
  • 4 Port PoE Switch (+1 GB Uplink)
    Add to Compare
    4 Port PoE Switch (+1 GB Uplink)

    SKU: ArcdynPoE-4

    This 4-Port Gigabit POE switch is able to power 4 IP cameras while leaving a separate Gigabit Ethernet uplink port to connect to your local network. It has a max Power over Ethernet budget of 40 Watts. 1 Port with POE Extend Feature. With the POE Extend Mode on, it can extend power and video signal up to 750ft via Cat. 5e twisted pair or above. @ 10Mbps.
    Add to Compare
  • 7 Items

    per page
    Set Descending Direction
    View as List Grid