EZ-RJ45®

5 Item(s)

  1. EZ-RJ45® CAT5/5e Connectors

    EZ-RJ45® CAT5/5e Connectors

    • Thru holes allow wire pairs to be inserted thru front of connector for faster terminations.
    • Works with solid or stranded wire.
    • Simple one piece design...no bars or liners.
    • FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks.
    • RoHS compliant
    • EZ to verify wire sequence.
    • Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041")
    • TAA Compliant
  2. EZ-RJ45® CAT6 Connectors

    EZ-RJ45® CAT6 Connectors

    • For use in CAT6 compliant data networks.
    • Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
    • EZ to verify wire sequence. Simple one piece design...no bars or liners.
    • Works with solid or stranded wire.
    • Faster terminations with reduced scrap.
    • Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041")
    • TAA Compliant
  3. Shielded EZ-RJ45® for CAT5e & CAT6 with Internal Ground

    Shielded EZ-RJ45® for CAT5e & CAT6 with Internal Ground

    • EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs.
    • Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance.
    • Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies.
    • Significantly improve Shannon capacity.
    • Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade.
    • Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant
    • Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041")
    • For solid round or stranded wire cables.
    • Made in the USA, Patented
    • TAA Compliant
  4. EZ-RJ12/11

    EZ-RJ12/11 Connectors (100 pc)

    For use in telephone & security installations.
    Faster, easier terminations with reduced scrap.
    For specialized telephone installations & communications equipment.
    For applications requiring custom/specific wire configurations.
    Works on solid or stranded wire.

  5. EZ-RJPRO™ HD Crimp Tool

    EZ-RJPRO™ HD Crimp Tool

    • Zero flex frame prevents torque loss during the crimping cycle.
    • Tool steel die head assembly provides 360 degree of connector support during crimp.
    • Clean, ultra flush trim on the EZ-RJ45® extended conductors.
    • Expanded surface area on contact drivers delivers full, uniform crimp force.
    • Built-in cutter and stripper for flat and round cable.
    • Patented “crimp and trim system” delivers a clean, flush trim on the extended conductors for all EZ connectors.
    • Ratcheted, high leverage and stable platform for consistent, repeatable terminations.
    • Full surface to surface contact delivers uniform crimp force.
    • Laser marked with wiring guide for proper wire sequence.

5 Item(s)