Surface Mount, Weather Proof, Tamper Resistant, Omni-directional Microphone
SKU
AM-ML1-TRWCF
SKU: AM-ML1-TRWCF
A high performance, low cost omni-directional electret microphone for use with IP cameras accepting microphone level input signals (PC compatible input). The attached cord is 6' long and comes standard with a stereo 3.5mm connector on one end. The AM-ML1-TRWCF's 3.5mm connector can be removed and the cord can be directly connected to cameras with terminal blocks.
A high performance, low cost omni-directional electret microphone for use with IP cameras accepting microphone level input signals (PC compatible input). The attached cord is 6' long and comes standard with a stereo 3.5mm connector on one end. The AM-ML1-TRWCF's 3.5mm connector can be removed and the cord can be directly connected to cameras with terminal blocks.
| Working Temperature | –25 to 85C |
|---|---|
| Frequency Response | 500Hz-13Khz |
| Power | 12 to 24VDC @ 10mA |
| Sensitivity | –45DB |
| S/N Ratio | more than 60DB |
| Microphone Type | Omni-directional 25’ pickup pattern |
| Weatherproof | Yes |
| Pre-Amplifier | Low noise MOSFET pre-amplifier |
| Hi-Cut/Low-Cut Filter | Jumper selectable hi-cut/low-cut filters limit frequency response to 900-6khz significantly reducing background noise. |
| Volume Range(s) | Jumper selectable volume range: "Line level" (0db) or "Microphone level" (-30db) |
| Adjustable Gain | Yes, in both volume ranges. |
| Polarity Protection | Yes, Reverse polarity protected. |
| Microphone Output | 100 Ohm unbalanced output. |
| Interference Protection | On-board voltage regulator and RFI filtering |
| Product Warranty | 1 Yr |