Tools

15 Item(s)

  1. 30 Piece Security Bit Set

    30 Piece Security Bit Set


    Bit Load:
    • Tamper-Proof Torx: T8, T9, T10, T15, T20, T25, T30, & T40
    • Tamper-Proof Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 3/32”
    7/64”, 1/8”, 9/64”, 5/32”, & 3/16”
    • Spanner: 4, 6, 8, & 10
    • Tri-Wing: 1, 2, 3, & 4
    • Torq-Set: 6, 8, & 10
    • Also includes adapter for use in drills and 1/4” drive accessories
    • All bits compatible with the Platinum Tools Stubby 8-in-1
    Screwdriver PN 19120C

  2. LANSeeker™ Cable Tester

    LANSeeker™ Cable Tester

    • Displays cable test results on main and remote units in less than 2 seconds
    • Immediately detects shorts by just plugging in one end of a cable to the tester
    • Identifies shorts, opens, miswires, reversed and split pairs
    • No on/off switch, automatically starts test when a connection is sensed between main and remote unit
    • Debug mode diagnoses and displays faults one pair at a time
    • Includes tone generator
    • Self-stored remote
    • Made in the USA
  3. EZ-RJ12/11

    EZ-RJ12/11 Connectors (100 pc)

    For use in telephone & security installations.
    Faster, easier terminations with reduced scrap.
    For specialized telephone installations & communications equipment.
    For applications requiring custom/specific wire configurations.
    Works on solid or stranded wire.

  4. platinum-tools-tp150-tone-and-probe-set

    Tone and Probe Set

    Probe Features
    Recessed push-button activates tone scanning when needed
    Tapered tip allows easy penetration of cable bundles
    Side thumb wheel adjusts volume and turns off
    power to reserve battery power
    Probe Sensitivity: 100Hz~300KHz

    Tone Generator Features
    Slide switch to select TONE/OFF/CONT
    Continuity mode to verify if a wire is broken
    Alligator clips to test pairs and an RJ11 connector for data or phone lines
    Tone Generator Output: 1.5KHz square waveform

  5. VDV MapMaster 2.0™ Test Kit

    VDV MapMaster 2.0™ Test Kit


    Kit Includes:

    • VDV MapMaster 2.0 with detachable Master Remote
    • RJ45 #1-12 Remote ID Set (ID Mapping only)
    • Coax F #1-8 Remote ID Set (ID Mapping only)
    • RJ45 Port Saver
    • RJ45 to Alligator Clips Cable
    • No-Fault Cable
    • F Female to F Female Adapter
    • BNC Female to F Female Adapter
    • BNC Female to F Male Adapter
    • 9V Battery
    • Instruction Manual
    • Case with Foam Insert
    • For troubleshooting, identifying and mapping multiple data cables use T139 Smart Remotes (sold separately)
    • For measuring lengths to shorts purchase a TDR tester such as the Cable Prowler.
  6. Platinum Tools 19120C 8 in 1 Ratcheted Stubby Screwdriver

    8-in-1 Ratcheted Stubby Screwdriver

    Bit Load Phillips 1, 2 and 3 Slotted 3/16", 1/4" Torx T15, T20 Nut Driver 1/4"
  7. Cat 5/6 Cable Jacket Stripper

    Cat 5/6 Cable Jacket Stripper

    • Removes the cable jacket on Cat5/5e/6 cables.
    • Accepts cable diameters from 0.18" to 0.25" (4.5mm - 6.3mm).
    • No adjustments required; easily switch from one cable type or insulation to another.
    • Does not nick inner conductors.
    • Recommended for PVC cable jackets.
    • Long life blade.
  8. ProStrip 16/30 Wire Strippers

    ProStrip 16/30 Wire Strippers

    • For 16-30 AWG solid / 18-32 AWG stranded wires.
    • Precision-ground strip nest.
    • Cut and chase threads on 16/32 & 8/32 bolts.
    • Serrated plier nose for gripping, pulling and twisting.
    • Holes in jaw for looping wire.
    • Hardened to HRC45.
    • Rust resistant black oxide finish.
  9. ProStrip 10/20 Wire Strippers

    ProStrip 10/20 Wire Strippers

    • For 10-20 AWG solid / 12-22 AWG stranded wire.
    • Precision-ground strip nest.
    • Cut and chase threads on 16/32 & 8/32 bolts.
    • Serrated plier nose for gripping, pulling and twisting.
    • Holes in jaw for looping wire.
    • Hardened to HRC45.
    • Rust resistant black oxide finish.
  10. PRO-Strike Punchdown Tool with 110 blade

    PRO-Strike Punchdown Tool with 110 blade

    • Terminate and cut Cat3/5/5e/6 cables
    • Spring loaded for fast, low effort wire seating and termination
    • Bayonet style (twist & lock) blade retention socket is compatible with industry standard tools and blades
    • New built-in hook - feeds or removes wire
    • New multi-use spudger - for screwdriver, IDC insert tool or to clean debris
    • 110, 66, 630, Krone and BIX™ style interchangeable blades
    • Color coded yellow on the cut side of the tool per industry standard
    • Adjustable low and high force impact settings are precisely controlled to meet the industry standard 8762D spec
    • Will not damage sensitive circuitry
    • Spare blade storage compartment in the handle
  11. NEVERDull™ Punchdown Blade, 110 Style

    NEVERDull™ Punchdown Blade, 110 Style

    • Advanced MIMS construction (Metal Injection Molding) ensures higher performance and longevity
    • Works with all industry standard 110 and 66 style cross connect blocks & keystone jacks
    • Compatible with all industry standard bayonet mount (twist & lock) punchdown tools
    • Conveniently stores in your punchdown tool handle
  12. NEVERDull™ Punchdown Blade, 66 Style

    NEVERDull™ Punchdown Blade, 66 Style

    • Advanced MIMS construction (Metal Injection Molding) ensures higher performance and longevity
    • Works with all industry standard 110 and 66 style cross connect blocks & keystone jacks
    • Compatible with all industry standard bayonet mount (twist & lock) punchdown tools
    • Conveniently stores in your punchdown tool handle
  13. 5" Side Cutting Pliers

    5 Inch Side Cutting Pliers

    • Cuts copper wire and soft metals up to 16 AWG (.05
    • 21° full flush cut.
    • Spring action.
    • Comfort grip vinyl handle.
  14. CCS-6 Cable Cutter

    CCS-6 Cable Cutter

    • Fully tested to 10,000 cuts on RG6 CCS, copper clad steel center conductor, with no degradation to the cutting blades
    • Provides outstanding cutting performance on all types of solid copper wire, twisted pair and coax cables
    • Optimal blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable
    • Comfortable PVC handle grips
  15. 22-in-1 Screwdriver Set

    22-in-1 Screwdriver Set

    • Security Torx® T8, T10, T15, T20
    • Security Hex: 1/8
    • Spanner: 4, 6, 8, 10
    • Security Robertson: 1, 2
    • Tri-Wings: 2, 3
    • Slotted and Phillips: Slotted: 7/32, Phillips: 2

15 Item(s)